Begin with the room and the job
Write down where each fitting will go before comparing models. A compact room, a long passage, a reception area and a work counter do not have the same layout or lighting needs. Note the room dimensions, ceiling height, existing fittings and whether the light is for general illumination or a particular task. This simple list helps prevent a wattage-only decision.
Wattage describes electrical power use, not the complete experience of brightness in a room. The catalog lists product wattage and a lumen figure for each listed model; use the specific model entry rather than assuming all panel lights perform alike. For a larger space, it can be more useful to plan several correctly placed fittings than to select one light only because it has a higher wattage.
Compare wattage and listed lumen information
The OVR catalog includes Slim Panel models at 9W and 12W and Pluto Panel models at 10W and 15W. Their listed MRP and specifications are shown on this page and in the official PDF catalog. These are examples to compare, not a universal recommendation for every room. Check the lumens printed for the exact model, and compare like with like when evaluating possible choices.
Also consider how many fittings are planned and how far apart they will sit. A row of lights over a work surface may need different spacing from a central arrangement in a small room. If you are unsure, share a simple room sketch and quantities with your electrician or OVR when requesting a quote. Do not infer an exact room-size coverage from wattage alone.
Measure the opening and outer dimensions
For a recessed installation, measure the existing ceiling cutout before ordering. The catalog gives cutout and outer dimensions for models that use them. For example, the listed Slim Panel 9W cutout is 135X135 and its outer dimension is 150X150X20; the Slim Panel 12W cutout is 150X150 and its outer dimension is 170X170X20. Confirm how the catalog records each dimension and match it to the fitting position.
A fitting must cover the opening while also fitting the available ceiling space. Check for nearby framing, ducts, wiring, insulation or other obstructions above the ceiling. A new installation should be planned from the actual fixture dimensions and the ceiling material, not just the front-face size. Ask the installer to verify measurements before making or enlarging an opening.
Choose colour temperature for the space
Several OVR models list 3K, 4K and 6.5K colour-temperature options; the Pluto Panel 10W listing says Tri Colour. In common lighting descriptions, 3000K appears warmer, 4000K more neutral and 6500K cooler in appearance. Perception also depends on wall colours, finishes and other lights in the same room. Check the exact model and selection available before placing an order.
For a home, think about the feeling you want in the room and whether adjacent areas should look consistent. In a shop, consider product appearance and the existing lights rather than mixing colour temperatures without a plan. If a space already has fixtures, compare the labels or ask the installer to identify them. A sample or one fitting can help evaluate appearance before a larger installation.
Ask clear questions about the driver
OVR lights are supplied with an OVR-branded isolated LED driver. An isolated driver separates the mains input from the LED output side. The homepage shows examples of the printed labels: input AC 220–240V 50Hz, with model label outputs of DC 18–24V, 300mA and DC 28–45V, 300mA. These label examples do not map a driver to a specific panel or COB model.
Check the required output voltage and current against the LED fitting before use. Keep this as a practical compatibility check, not a reason to guess from wattage or a product-family name. A qualified electrician can inspect the circuit, switching and ceiling conditions. If dimming, controls or another special electrical requirement matters, ask about the exact model before selecting it.
Use a short pre-order checklist
Before finalising quantities, record the room or area, fixture count, product code, wattage, cutout, outer dimensions and colour-temperature choice. Add notes about ceiling type, access above the ceiling and any existing control equipment. For a replacement, take a clear photo of the old fitting and measure the opening. This makes it easier to catch a mismatch before installation begins.
Compare the printed catalog MRP in INR with the quote you receive, and be clear that MRP is not the same as an agreed trade or project price. Ask for the selected model codes, quantities, invoice details, delivery destination and applicable warranty information to appear in the written confirmation. OVR Electric provides GST invoicing and lists a two-year warranty; confirm the applicable terms for your order.
Review real catalog models, then request a quote
The product cards below show selected panel models and their printed catalog MRP. Use the exact model code when discussing a quote so that the wattage, dimensions and listed colour-temperature option are clear. The full official catalog is available as a PDF. If you are buying for a project, share your location and required quantities so delivery arrangements can be confirmed for your address.
For Indore and other Madhya Pradesh locations, contact OVR Electric through WhatsApp or the inquiry form. A quote is not complete until the product selection, quantities and delivery details are understood by both sides. If a dimension or technical specification is not shown in the catalog, ask before ordering rather than filling the gap with an assumption.
See the OVR supplied driver label examples ↗
OFFICIAL CATALOG / MRP IN INR
Selected catalog products
Cards below show printed catalog MRP, not a wholesale quote. Request a quote for the exact models and quantities you need.
slim panel light / 2 catalog variantsSlim PanelFrom Rs 243.00 MRP9W–12W
LED panel light / 2 catalog variantsPluto PanelFrom Rs 107.00 MRP10W–15WRelated product information: Wholesale LED Panel Lights in Indore ↗ · Open the complete official catalog ↓
QUESTIONS / ANSWERS
Frequently asked questions
What should I compare for LED panel light price in Indore?
Compare the exact catalog model, printed MRP, wattage and cutout. Request a separate bulk quote for your codes and quantities.
Does a higher wattage always mean a better panel light?
No. Wattage is only one specification. Consider the listed lumen information, number and spacing of fittings, room use and the dimensions that fit your ceiling.
What is the LED driver and why does its output matter?
An LED driver supplies the electrical output an LED needs. OVR lights are supplied with an OVR-branded isolated LED driver; an isolated driver separates the mains input from the LED output side. The printed driver labels show AC 220–240V 50Hz input and DC output ranges of 18–24V, 300mA or 28–45V, 300mA. Check the required output voltage and current for your panel or COB before use. These label examples do not map a driver to a specific OVR light model.
Need help with your product list?
Share the catalog model codes, quantities and delivery location. OVR Electric can respond to your specific request; confirm price, warranty and delivery details before ordering.